1: According to the technique of the ZWC product, the specification is intended to describe the functional requirements of automatic cutting equipment,The main process flow is:Unwinding→Inserting→Traverse Cutting→Convey→Collect
2 Technical Information
| Model |
ZWC-1400-2 |
ZWC-1700-2 |
| Reference weight of cutting paper |
50-500g/m2 |
50-500g/m2 |
| Max.Diameter of paper |
1650mm(65〃)Max |
1650mm(65〃)Max |
| Max.Pieces of paper |
1400mm(55〃)Max |
1700mm(67〃)Max |
| Total power |
25KW |
28KW |
| Cutting length |
400-1600mm |
400-1600mm |
| Cutting accuracy |
+/-0.4mm |
+/-0.4mm |
| Maximum cutting speed |
300cuts/min |
300cuts/min |
| Maximum cutting meter speed |
300m/min |
300m/min |
| Atmospheric pressure |
0.8MPa |
0.8MPa |
|
Power supply
|
AC380V/220Vx50HZ |
AC380V/220Vx50HZ |
| Total weight |
11000kg |
13000kg |
| Dimensions |
12m×3.9m×2.35m |
12m×4.2m×2.35m |
3.Machine Introduction
3.1 Automatic Roll Unwinding Unit
Automatic Roll Unwinding Unit is Equipped with Hydraulic Shaftless Roll Stands two clamps and Braking system, which are Easy-to-use During Roll Manipulations
3.2: Prevent curling system
Adjusting the roll paper due to the curl of the paper, make the paper smooth after cutting.
3.3: Correct paper offset system
There are three correct paper offset modules,that meas the upper paper will align the lower paper automatically while the all four reel
working at the same time
3.4:Sub-knife system(Selective accessories)
There are totally three sub-knife, knives for web slitting and web edge trimming,and is equipped with a waste paper collector to discharge the waste paper.
3.5:Knife holder and Cutting blade
A total of two knives, one fixed on the base ,the other is on the holder for rolling cutting
3.6:Conveyor
Taking advantage of the velocity distinction of the conveyor, makes the paper superposition transport
Your message must be between 20-3,000 characters!
